Cherry wood joinery with hand-rubbed oil finish.

Sea rails and fiddles on all horizontal surfaces, laminated trim pieces on all arch door frames and cap bulkheads.

Horizontal ash ceiling battens screwed and plugged with Satin Urethane finish.

Planked and plugged 1/2 inch solid teak with inlaid basswood strips above 3/4 inch marine grade plywood sub-floor. Sole lift-outs have mechanical locking devices.

Sanded and sealed with three coats of Satin Urethane finish.

Handrails on cabin trunk sides, with Formica side liner.

Isolated from bilge with vents for maximum air circulation.

Flush-mounted on all opening locker doors and drawers.

Solid cherry face with cedar bottoms and dovetail side connections, mounted on epoxy-coated drawer slides.

Walk around drop-leaf table with cherry wood top and center storage, Formica leaves with fiddles. Table is through-bolted to floor timbers.

Opposing settees port and starboard. Storage lockers behind settee backs and a cabinet above the port and starboard settee.

Four locking sliding track shelves.

1/8 inch Formica with removable panels for easy access to underside of deck.

Interior access with divider and drains to bilge.

Valiant Custom interior upholstery with high-quality foam cushions.

Oval stainless steel in head. Deep double stainless steel in galley.

Bulkhead mounted with trim in head and aft stateroom.

Large chart table with spacious electronics area.

Vented with drain.

At companionway steps with drain to bilge.

In galley

Stainless steel, gimbaled three-burner stove and oven with LPG safety control panel.

Stainless steel mounted above stove.

Sturdy rings for offshore galley strap.

4 inch closed cell foam insulation and vapor barrier with sliding shelves and divider.

Liners in hanging lockers and bottom of drawers.

Large lighted working area with easy engine access.